The replica De Ville 424.13.40 comparison splits into three tiers: quartz copies under $60, mid-tier automatics from about $120 to $250, and super clones at $300 and up that copy the Omega 2500 Co-Axial layout. The reference is the Omega De Ville Prestige 39.5 mm in stainless steel on a leather strap. Genuine examples sell used for roughly $1,800 to $3,000, so the tier you pick decides how close the watch feels on the wrist.
Replica De Ville 424.13.40 Original: What That Reference Number Means
What does the genuine 424.13.40 reference specify?
Reference 424.13.40.20.02.001 is a De Ville Prestige Co-Axial Chronometer with a 39.5 mm steel case, a silver or opaline dial, and a domed sapphire crystal. Omega caliber 2500 is an automatic with a Co-Axial escapement, 27 jewels, and a 48-hour power reserve at 25,200 vibrations per hour. Most spec sheets list water resistance at 30 m, which matters because plenty of replicas seal worse than that.
How do the three replica tiers compare?
- Quartz tier (under $60): Ticking seconds hand, flat printed dial text, plated case that fades, and a strap that hardens within weeks.
- Mid tier ($120 to $250): Often an A21j or Seagull ST2130 automatic, mineral glass, decent dial printing, and a case that runs 1 mm thicker than the original.
- Super clone ($300 and up): Decorated 2824 or 2500-style plates, sapphire crystal, correct 39.5 mm case width, and closer dial fonts with a properly placed date window.
Which details give a replica away fastest?
Dial text and the date window are the first tells. Genuine De Ville Prestige printing is crisp with even letter spacing, while replicas often show a heavy OMEGA wordmark and a slight misalignment at the date aperture. Case thickness comes second, since many copies sit near 11 mm or more instead of the slim genuine profile.
Replica De Ville 424.13.40 Decision: How to Choose Wisely
Do the hands and crystal matter as much?
Yes. Genuine Dauphine hands are polished across the top edge and beveled along the sides, and a budget replica shows blunt edges under a loupe. Sapphire versus mineral glass also separates tiers, and a simple water drop test at the counter reveals which one you are holding.
replica de ville 424.13.40 best
Does any replica use a real Co-Axial movement?
No. The Co-Axial escapement is produced by Omega, so no replica factory ships a genuine caliber 2500. High-end copies use ETA 2824 clones or decorated automatics with fake bridge plates and engraved rotors. Service intervals, accuracy, and long-term reliability therefore stay closer to a generic Swiss-style automatic than to a real Omega.
What should you check before buying a 424.13.40 replica?
- Confirm the seller photos show a 39.5 mm case and sapphire crystal.
- Ask for movement photos and a video of the seconds hand sweep.
- Inspect date font, dial print, and crown logo under zoom.
- Request a lume photo and a written water resistance figure.
Price is the final filter. Anything under $80 will not hold up beside the genuine watch, and anything near $400 should carry a clone 2500 style movement with proper decoration. When a listing claims a real Co-Axial movement, the listing is simply wrong.
Frequently asked questions
Is a De Ville 424.13.40 replica worth buying?
At the super clone tier it can work for daily wear, since case size and dial layout match the original. Budget tiers are better treated as costume pieces than as durable watches.
How close is a super clone to the genuine De Ville Prestige?
Externally it can look close in photos and at arm's length. Movement, finishing, weight, and hand feel still differ, and a watchmaker spots the gap in a bench inspection.